Galvanized steel sheet is carbon steel sheet coated with zinc on two sides. the process used to do this is known as the continuous hot dip process. this process results in a layer of zinc which adheres tightly to the base steel and has a spangled, or snowflake-type, appearance. The layer of zinc acts as a sacrificial coating.
Galvanised steel is mild steel with a coating of zinc The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel Galvanised steel is one of the most widely used products, used extensively in the building sector, automotive, agricultural and other areas where the steel needs to be protected from corrosion. Galvanized Steel Sheet, Hot Dipped Galvanized, Galvanized Sheet Coil, Gi Sheet Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com
Our blades was made from high quality steel,which was produced by China famous steel factory which means our blades will have al longer time.We do a lot of experiment to create an alloy formula which can improve the performance of rotary blades.And with individual deposition techniques our product have obvious advantages on the quality of agricultural blades.
Material
 C(%)
Si(%)
Mn(%)
Cr(%)
P(%)
S(%)
65Mn
0.62-0.70
0.17-0.37
0.9-1.20
<=0.25
<=0.015
<=0.035
60Si2Mn
0.56-0.64
1.50-2.00
0.69-0.90
<=0.35
<=0.035
<=0.035
70Mn
0.67-0.75
0.17-0.37
0.90-1.20
<=0.25
<=0.035
<=0.035
60Mn
0.57-0.65
0.17-0.37
0.7-1.00
<=0.25
<=0.035
<=0.03
Material
 C(%)
Si(%)
Mn(%)
Cr(%)
P(%)
S(%)
65Mn
0.62-0.70
0.17-0.37
0.9-1.20
<=0.25
<=0.015
<=0.035
60Si2Mn
0.56-0.64
1.50-2.00
0.69-0.90
<=0.35
<=0.035
<=0.035
70Mn
0.67-0.75
0.17-0.37
0.90-1.20
<=0.25
<=0.035
<=0.035
60Mn
0.57-0.65
0.17-0.37
0.7-1.00
<=0.25
<=0.035
<=0.03
Hot-Dip Galvanizing or HDG is a process in which zinc bonds to steel at the molecular level to produce a four-layer corrosion-resistant finish. The first three layers are zinc-iron alloy layers that are actually harder than the base steel. The fourth or top layer is pure zinc.
Model NO.: 400L 500R
Model NO.: 400L 500R
Our blades was made from high quality steel,which was produced by China famous steel factory which means our blades will have al longer time.We do a lot of experiment to create an alloy formula which can improve the performance of rotary blades.And with individual deposition techniques our product have obvious advantages on the quality of agricultural blades.