Imported auto parts have a large number of models, a variety of products, and high demands. In the early stage of production, the investment in mechanical equipment, work clamps, etc. is relatively large, and the requirements for raw materials are also high. Therefore, the production cost is relatively higher than domestic auto parts, combined with small batches, the benefits of its output are low. In the sales price, compared with the original imported parts, only imported parts of the original 30-50%, the profits of the production companies are relatively thin. In order to smoothly carry out the localization of imported auto parts, the state's planning unit designated by the industry management department must be regarded as a foreign exchange earning enterprise and adopt preferential policies in terms of preferential policies. First, it is necessary to supply high-quality, low-priced raw materials, and to lift the production companies to find rice. We have to worry about the relative reduction in production costs and make the production companies profitable. Second, supply cheap coal and electricity to meet the energy supply, especially the supply of electricity, so that production companies are protected from the shortage of coal and electricity. Tax reduction measures are implemented to encourage enterprises to produce imported vehicles and localized accessories. Fourth, priority should be given to liquidity loans. Businesses have to work hard. Due to the variety of imported auto parts, small quantities, and low output value, large and medium-sized production companies are blind to their eyes, and small businesses lack technology, equipment, and capital, and want to do it. The domestically-manufactured parts of imported cars that have been produced are mostly produced by small enterprises and township enterprises. This is currently the quality of imported cars' localized accessories is low, the output of long-term products is larger than that of sales, the short-term products are in short supply, and key products with high technological content are not produced. The main reason. Therefore, it is hoped that large and medium-sized production enterprises will first take the lead in ideology, give full play to the role of backbone enterprises as the main force of the national industry, and dare to shoulder the heavy burden of localization of imported auto parts, and give full play to the advantages of mechanical equipment and technical strength; And the role of a device to speed up the absorption of digestion; to look far, not to lose or lose. Capacitor Parts Forming Machine
SF-501C has High production efficiency, 15-20 tubes can be placed in one time,which is 2-3times that of manual work.
SF-501B Apply to mass production, excellent device for feet cutter moulding.
SF-501A Customized vibrating plate automatic feeding and cutting feet, suitable for bulk electrolytic capacitors, leds.
SF-501 The Resistor bulk Forming Machine apply to mass production,the best assistant equipment for short feet operation.Apply range:A<10mm and B<16mm electrolytic capacitor.
SF-511 The motor can be variable speed without noise.Manual belt type unilateral capacitor, resistor, crystal, electronic parts Cutting Machine.
SF-512 It is suitable for roll or box packed material.side-band radial lead cutting machine. taped automatic capacitor cutting machine is a small size.Cutting accurately.Suitable for long and short foot processing.
Capacitor Shearing Machine,LED Capacitor Resistor Component,Capacitor Bending Forming Machine,Bulk Capacitor Shearing Machine SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com