A: We are factory. A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity. A: Yes, we could offer the sample for free charge but do not pay the cost of freight. A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment. A: We are factory. A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity. A: Yes, we could offer the sample for free charge but do not pay the cost of freight. A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment. PVC Edge Banding For Furniture
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Furniture edge banding is a material for protecting, decorating and beautifying the section of furniture panels. It can make a piece of furniture show the overall effect of clear wood grain and colorful.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements. PVC Edge Banding For Furniture,Pvc Edge Banding For Furniture, Edge Banding For Furniture,Pvc Edge Banding Tape Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbpolymer.com
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
Application
                                                                    Â
Model
HP
W
Current (A)
Capacitor (uf)
H.Max (M)
Q.Max (L/min)
Pipe Size
Pressure Set (bar)
Tank (L)
GDHm-125A
0.15
125
1.5
8
30
32
1"X1"
1.5
2
GDHm-250A
0.35
250
3.5
10
32
35
1"X1"
1.8
2
GDHm-370A
0.5
370
4.5
10
36
36
1"X1"
2.2
2
GDHm-550A
0.75
550
2.9
15
45
55
1"X1"
2.6
2
GDHm-750A
1
750
3.5
20
55
58
1"X1"
2.8
2
GDHm-1100A
1.5
1100
4.5
25
62
66
1"X1"
3.2
2
GDHm Automatic Self-priming Pump    
    Â
ItemÂ
Description
ItemÂ
Description
ItemÂ
Description
ItemÂ
Description
11
Press Sensor
21
Bearing
31
Screw
41
O-ring
12
Screw
22
Shaft Key
32
Cable Plug
42
Pressure Tank
13
Inlet Rubber
23
Rator
33
Cable Net
43
Pressure Sensor
14
Stainless steel Inlet
24
Bearing
34
Screw
44
Cover
15
O-ring
25
Stator
35
PC Clip
45
Plastic Base
16
Screw
26
Motor HouseÂ
36
Volatede Regulator
46
Screw
17
O-ring
27
Terminal Box
37
O-ring
Â
Â
18
Screw
28
Screw
38
Fan
Â
Â
19
Front Plate
29
Capacitor
39
Screw
Â
Â
20
Screw
30
Terminal Box
40
Fan Cover
Â
Â
Production Work-flow Chart of Pump
Â
                           About Us
                                  
FAQQ: Are you trading company or manufacturer ?
Q: How long is your delivery time?
Q: Do you provide samples ? is it free or extra ?
Q: What is your terms of payment ?
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
Application                                                                    Â
Model
HP
W
Current (A)
Capacitor (uf)
H.Max (M)
Q.Max (L/min)
Pipe Size
Pressure Set (bar)
Tank (L)
GDHm-125A
0.15
125
1.5
8
30
32
1"X1"
1.5
2
GDHm-250A
0.35
250
3.5
10
32
35
1"X1"
1.8
2
GDHm-370A
0.5
370
4.5
10
36
36
1"X1"
2.2
2
GDHm-550A
0.75
550
2.9
15
45
55
1"X1"
2.6
2
GDHm-750A
1
750
3.5
20
55
58
1"X1"
2.8
2
GDHm-1100A
1.5
1100
4.5
25
62
66
1"X1"
3.2
2
GDHm Automatic Self-priming Pump        Â
ItemÂ
Description
ItemÂ
Description
ItemÂ
Description
ItemÂ
Description
11
Press Sensor
21
Bearing
31
Screw
41
O-ring
12
Screw
22
Shaft Key
32
Cable Plug
42
Pressure Tank
13
Inlet Rubber
23
Rator
33
Cable Net
43
Pressure Sensor
14
Stainless steel Inlet
24
Bearing
34
Screw
44
Cover
15
O-ring
25
Stator
35
PC Clip
45
Plastic Base
16
Screw
26
Motor HouseÂ
36
Volatede Regulator
46
Screw
17
O-ring
27
Terminal Box
37
O-ring
Â
Â
18
Screw
28
Screw
38
Fan
Â
Â
19
Front Plate
29
Capacitor
39
Screw
Â
Â
20
Screw
30
Terminal Box
40
Fan Cover
Â
Â
Production Work-flow Chart of Pump
Â
                           About Us
                                 Â
FAQQ: Are you trading company or manufacturer ?
Q: How long is your delivery time?
Q: Do you provide samples ? is it free or extra ?
Q: What is your terms of payment ?
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.
Model NO.: GDHm-125A, 250A, 370A, 550A, 750A, 1100A
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Clarified Water Pump
Industry: Clean Water Pump
Media: Clean Water
Performance: Automatic Pump
Theory: Vortex Pump
Motor Shaft: 45#/304# Stainliss Steel
Impeller: Brass/Stainless Steel/PPO
Brand: OEM
Motor Sheet: Cold Silicon Rolling Sheet
Mechanical Seal: NBR/Ceramic/Carbon
Insulation: B/F
Protection: IP44
Rator: Silicon Steel Sheet Cold Rolling
Stator: Silicon Steel Sheet Cold Rolling
Trademark: GORDON
Transport Package: Foam+Carton+Pallet
Specification: Jet Pump
Origin: Fu′an China
HS Code: 8413709990
Model NO.: GDHm-125A, 250A, 370A, 550A, 750A, 1100A
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Clarified Water Pump
Industry: Clean Water Pump
Media: Clean Water
Performance: Automatic Pump
Theory: Vortex Pump
Motor Shaft: 45#/304# Stainliss Steel
Impeller: Brass/Stainless Steel/PPO
Brand: OEM
Motor Sheet: Cold Silicon Rolling Sheet
Mechanical Seal: NBR/Ceramic/Carbon
Insulation: B/F
Protection: IP44
Rator: Silicon Steel Sheet Cold Rolling
Stator: Silicon Steel Sheet Cold Rolling
Trademark: GORDON
Transport Package: Foam+Carton+Pallet
Specification: Jet Pump
Origin: Fu′an China
HS Code: 8413709990
  Domestic Electric Copper Wire Self-priming Booster Pump with Plastic Box
Technical Data
Â
Technical Data
Â