When installing electromagnetic pulse valve, please note the following:
According to the degree of processing and refining, it can be divided into three types: fully refined paraffin, semi-refined paraffin and crude paraffin.
Crude paraffin wax has a higher oil content and is mainly used for making matches, fiberboard, tarpaulin, etc. Fully refined paraffin and semi-refined paraffin are widely used, mainly used as components and packaging materials for food, oral medicine and certain commodities (such as wax paper, crayons, candles, carbon paper), coating materials for baking containers, used for fruit preservation , Insulation of electrical components, improve rubber aging resistance and increase flexibility, etc.
Paraffin wax is a mixture of hydrocarbons extracted from certain distillates of petroleum, shale oil or other bituminous mineral oils. The main component is solid alkanes, odorless and tasteless, and white or light yellow translucent solids. Paraffin wax is non-crystalline, but has a clear crystal structure. There is also artificial paraffin. Paraffin Wax,Bulk Paraffin Wax,Refined Paraffin Wax,Paraffin Wax Powder Henan Shunbang Chemical Industry CO.,Ltd , https://www.spvcresin.com
Paraffin wax is a kind of petroleum processing product, a kind of mineral wax, and a kind of petroleum wax. It is a flake or needle-shaped crystal obtained by solvent refining, solvent dewaxing, or freezing crystallization of wax, pressing and dewaxing of lubricating oil fraction obtained from crude oil distillation, and then solvent deoiling and refining. Used to make higher fatty acids, higher alcohols, matches, candles, waterproofing agents, ointments, electrical insulating materials, etc.
1. The excellent installation method of the solenoid valve is vertical to the horizontal pipeline with the coil upward. ±30° tilt allowed when conditions do not allow. Otherwise, normal use cannot be guaranteed.
2. The parameters on the nameplate of the solenoid valve should be consistent with the actual requirements.
3. The arrow on the solenoid valve body should be consistent with the medium flow direction.
4. In order to ensure the normal use of the solenoid valve, install a water separator in front of the solenoid valve.
5. In the hazardous environment, explosion-proof solenoid valves should be used to prevent sparks from causing explosions and other accidents.
6. Before the installation, please purge the air bag and the pipeline to avoid damage to the diaphragm caused by the foreign material.
7. When the solenoid valve is faulty, it is recommended to install a bypass (bypass) device for timely isolation and easy maintenance.
8, when the solenoid valve is not installed temporarily, it can be stored in 0 ~ 40 °C, relative humidity ≤ 80%, but no corrosive gas in the room, as far as possible to avoid open storage.
9, after opening the box should first check the instruction manual, factory certificate, packing list is complete. According to the list, check whether the product name and model are consistent, and check if the nameplate matches the purchase order. If there is a defect or discrepancy, contact the manufacturer in time to find a solution.