There are many kinds of pneumatic pipes, which are generally produced with PU raw materials, with stable quality, high pressure resistance, weather resistance, wear resistance, zigzag resistance, smooth and flexible pipe body, bright color, high elasticity, winding resistance and small bending radius.
The tube body is smooth and flexible, bright color, high elasticity, winding resistance and small bending radius. Temperature range: - 15 - + 70 ℃. Pu Pneumatic Pipe,Pu Air Hose,Pu Pneumatic Hose,Pneumatic Spring Hose, Pu Pneumatic Hose Tubing Glove Industry Co.,Ltd. , https://www.glovemech.com
1. Components Of Drywall Roll Profiling Machinery:
The roll forming machine consists of manual uncoiler, infeed guide, hole puncher, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table.Â
Working Flow
Uncoiling the sheet   →  Infeed guiding  →    Roll forming   →   Measure length→Â
Cutting the panel    →   panels to the supporter (option: automatic stacker).
2. Technical Parameters
Material Spec            Aluminum, coated aluminum, galvanized and                                             painted galvanized steel sheet
Thickness               0.3 mm to 0.7 mm
Web Width              38/ 64 /89 mm;
Coil Stress              Q235 Mpa (33KSI); max. Q345Mpa (50KSI);
Roll forming Speed        12~15m/min.
Cutting Tolerance          ≤±2.5mm
Power: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â main power 4 kw, hydraulic power 3 kw.
Voltage: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â as per customer's request.
Manual Uncoiler          Max. Capacity: 3000kgs
Type of Cutting           Roll-formed and length-set cutting
Â
3. Material of Main Equipment
Roller Material       High grade No.45 forged steel, coated with hard chrome.
Active Shaft Material  High grade No.45 carbon wrought steel,which can                                         improve the integrated mechanic feature of the shaft.
Electric Elements       PLC control panel, transducer imported from Mitsubishi of                                   Japan.Other elements are from famous suppliers of China.
Cutter blade         Cr12 mould steel with quenched treatment.
4. Standard Equipment of Machine
Manual Uncoiler         1set
Infeed Guide            1set
Hole Puncher           1set
Roll Forming Station      1set
Post Cut Equipment      1set
Hydraulic Station         1pc
PLC Control Console     1pc
Product Support Table     2sets
Â
5. Series design of product 
Our services:
1.  Professional engineers are available to be sent to the customers' factory to install and debug the machines and train the staff how to operate and maintain the machines.
2.  We can design different kinds of profiles and fittings for machine, as per customer's requirements. You can send me the profile drawing and we will design the machine for you.
3.  Every process will be checked by responsible QC which insures every product's quality.
4.  Professional packing teams which keep every packing safely.
(1) Rollers are put on anti-rust oil and packed by bubble wraps; some other electric parts are packed by bubble wraps as well.Â
(2)The oil hose and electric wires ae marked, and easy to be connected when used;Â
(3)In container loading, sea-worthy, well fixed by wire rope, wooden block and nails.
5.  One-year warranty will be assured for all our machines. Moreover, We promise to provide permanent technical support and after-sales service with our customers.
6.  We warmly welcome you to visit our factory for more detailed information, inspecting our machines and we will pick you up at HangZhou Railway station.
FAQ:
1. Â Q: Are you manufacture or trrading company?
   A:We are manufacturer & exporter who signed in 2004, and our boss has many years experiences in machinery.
2. Â Q: Why should I choose you?
   A:We are professional manufacture company that could provide the best products for the best price, high quality of services, and credible quality assurance.
3.  Q: How does your factory conduct Quality Control and Inspection?Â
   A: We are quite proud of our quality control procedure. It's comply with ISO quality system to control produce from the raw materials received to finishing warehousing. Any imperfect articles are rejected by our quality control.
4.  Q: How many kinds of products do you produce?
   A: We have produced different kinds of Steel Roof Tile Roll Forming Machine, Corrugated Steel Sheet Roll Forming Machine, C/Z Purlin Roll Forming Machine, Steel Deck Roll Forming Machine,  Slitting Line, Cut to Length Line, Press Brake, Shearing Machine, PPGI ,Gi ,PPGL ,Gl, Aluminum Coil. And we also can provide its finished products.
5. Â Â Q: Where is your factory located? How can I visit there?
   A: Our factory is located in TongXiang, ZheJiang province. We could pick you up from HangZhou East Railway Station or TongXiang  Railway Station when you come.
Â
   Please feel free to contact me for more up-date information and any queries you have. Best quality machines and services will be provided for you.
Â
Product classification
1. Pu pneumatic pipe
2. Pu (polyether) pneumatic pipe
3. Pu (polyurethane) bobbin
4. Pu (polyether) bobbin
difference:
Polyurethane pneumatic pipe is over air type. If it is used for over water, its service life will be affected,
Polyether pneumatic pipe can pass air or water, with more stable physical properties and longer normal service life. It is an ideal material for pneumatic pipe.
The bobbin is wrapped with a layer of fiber in the middle of the common pneumatic pipe. Therefore, the bobbin is more solid, pressure resistant and non explosive than the common pneumatic pipe.
Product selection
What should be considered when choosing the type of plastics for blow molding pneumatic pipe?
The following aspects should be considered in the selection of pneumatic pipe materials.
Whether the wall thickness of the welded blank of the pneumatic pipe can be kept uniform, whether a higher blowing pressure is needed, whether the blowing is uniform, whether the surface of the pneumatic pipe is bright, whether the demoulding is easy, and whether the strength can meet the requirements, etc.
Performance comparison of plastics for blow molding pneumatic pipe. The pneumatic tube formed by blow molding is in thermoelastic state, and its density is smaller than that after cooling and shaping, resulting in shrinkage. For the general size of pneumatic pipe is not strict, forming shrinkage has little effect. But for the pneumatic pipes of specified size, such as some hoses used in precision machines, large shrinkage has a considerable impact. The larger the blowing volume is, the more significant the effect is.
The advantages of extruding and blowing plastic forming pneumatic pipe are less investment in production equipment, simple equipment structure, easy mold manufacturing, high forming of pneumatic pipe during production, uniform temperature control, and various specifications of pneumatic pipe can be formed. The disadvantage is that the wall thickness uniformity of pneumatic pipe is poor.
The advantages of injection blow molding pneumatic pipe are that the plastic pneumatic pipe has good product quality, accurate dimensions, no seams, uniform wall thickness, multi-mode molding production, high degree of automation, which is very suitable for large-scale high-efficiency production of small specifications. The disadvantage is that the investment of equipment and molding die is large, and the operation and production need skilled workers.
Product advantages
Excellent flexibility. The bending radius is small and the bending resistance is good. It has high elastic recovery memory effect.
Wear resistance, tearing and impact. It can resist some non corrosive chemicals and oils. It can circulate inflammable objects and weld.
It can be incinerated into ash 100% and is recognized as an environmental protection product
Good damping, smooth inner wall, low friction coefficient, high medium passing capacity, good flame retardant, non-toxic and tasteless,
The color can be customized on demand for easy pipeline identification.
Applicable range of pneumatic pipe
Assemble all kinds of pneumatic tools, pneumatic automation machinery, air compressor and all kinds of connecting pneumatic components.
performance parameter
Abrasion resistance: 30mg
Ultimate elongation: 390-480%
Burst pressure: 20-30kgf / cm2
Working vacuum: - 25hg60-15kgf / cm2
Tensile strength: 300kgf / cm2
The safety factor ratio of burst pressure and long-time service pressure is 3:1
Tips for pneumatic pipe
Polyurethane pneumatic hose is suitable for compressed air, ordinary industrial water and non corrosive oil. In order to maintain a long service life, it must be used under rated working pressure and ambient temperature. As the temperature rises, the working pressure should be reduced accordingly. If it exceeds the limit, the hose may break. If the fluid temperature is too high or the fluid is corrosive, the hose may break. If the working environment temperature is too high or there is chemical gas in the working space, the hose may crack. If the hose is stored in a wet place or the storage period is too long, the hose may hydrolyze or age, which may lead to fracture
Model NO.: as your requests
Material Spec: Aluminum, Coated Aluminum, Galvanized and Painted
Thickness: 0.3 mm to 0.7 mm
Web Width: 38/ 64 /89 mm
Coil Stress: Q235 MPa (33ksi); Maximum Stress Yield Is Q345MPa
Roll Forming Speed: 12~15m/Min
Cutting Tolerance: 2.5mm
Power: Main Power 4 Kw, Hydraulic Power 3 Kw
Voltage: as Per Customer′s Request.
Manual Uncoiler: Max. Capacity: 3000kgs
Type of Cutting: Roll-Formed and Length-Set Cutting
Trademark: WILLING INT′L
Transport Package: Wooden Box and Container
Specification: ISO9001, CE Standard
Origin: China Pr
HS Code: 8455221000
High Quality Of Drywall Metal Stud & Track Cold Roll Forming Machine