Leisuwash SG Touchless Car Wash Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine.
Leisuwash SG touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
The development of the Leisuwash SG had one principle: a brushless machine should still deliver a great wash result ! The combined chemical applicator and high pressure bar do make this possible. It keeps an even distance to the car so that the chemicals can reach all parts of the vehicle in the same concentration. The combination of different chemicals will soften up even persistent dirt and the contouring high pressure system will clean it off easily. Touchless Car Wash Machine,Leisuwash Sg Series,Leisu Wash Sg,Leisuwash Sg Car Wash Machine Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdtouchlesscarwash.com
Analysis of reasons: This fault is mostly in the remote control itself, and there are the following situations: (1) The battery is exhausted; (2) The battery is positive or negative, and the reed is rusty or in poor contact; (3) The remote controller is rained or Water, oil, etc. In this regard, the circuit board can be taken out, cleaned with industrial alcohol, dried with a household hair dryer or allowed to dry naturally before use.
Symptom 2: The remote control distance becomes shorter and shorter. When the signal is transmitted, the LED brightness of the remote controller becomes dark or flashes.
Analysis of the reasons: This phenomenon is mostly battery low battery replacement. In addition to this, it is recommended not to adjust or replace the components of the remote control yourself, so as to avoid causing greater losses.
Symptom 3: A function key of the remote controller fails. When this key is pressed, the LED indicator does not light.
Analysis of the reason: The failure of a function key (other function keys are normal) is mainly because the function keys are damaged or the soldering points of the key pins and the circuit board are desoldered. The keys of the remote control are mostly micro-switches, which are usually light when used, and they are waterproof, drop-proof, and heavy.
Symptom 1: The remote control does not work. When you press each function button of the remote control, the red LED of the remote controller does not light up.