Ceiling Floor Type Air Conditioner The ceiling floor type a/cs series include all types of ceiling floor a/cs which suitable for different markets, include ceiling floor type a/cs with R410A and R22 gas, power supply of 220~240v/50Hz/1ph, 230v/60Hz/1ph, 380~415v/50Hz/3ph and 380~415v/60Hz/3ph. Floor Mounted Aircon,Free Standing Air Conditioner,Floor Ceiling Type Air Conditioner,Ceiling Floor Type Air Conditioner Foshan Dinghan Electrical Technology Co., Ltd , https://www.fsdinghanelectrical.com
Nowadays, the changes of the times have made everyone more and more interested in ancient culture. From the recent ghost-lit TV series, we can see that there are many museums in China. When we talk about here, we may all have a question, so many precious things. The artifacts, they are all there, the answer is the museum vault door , it is a very good protection facilities, able to resist the malicious destruction of criminals, so most museums will purchase this protective facilities, but because of its Not much to understand, we may be relatively disadvantageous at the time of acceptance, so today Xiao Bian came to talk about acceptance process.
First: We first inspect the appearance of the product, look at the degree of convergence of the door joints, whether the door surface is smooth, there can be no bumps, check whether the lock and transmission mechanism can be used normally, as well as safety performance and so on.
Second: carefully check the door around to see how the four sides of the steel plate convergence, generally a good vault doors are all formed, there is generally no gap around, not only beautiful and stylish, but also has a very good flood control function, light Lightly tap the door and listen to the sound. The good-quality museum vault door is usually made of all steel. The sound sounds very crisp. If it is a kind of boring sound, then you need to pay attention. You are very likely to buy the kind of concrete door on the two sides of the steel plate.
Third: Open the door cover, look inside the structure to see how thick the steel plate is, and whether there is a difference in the design plan, compare the level standards issued by the factory to you to see if it is qualified, if there is a test report , then you don't need to pay attention to this point.
Fourth: Open the package and see if the museum has a three-C logo on the vault door. The three C logos are generally only qualified through third-party certification. Of course, we must also pay attention to its authenticity. After it is correct, then it is a relatively high performance vault door.
When these confirmations are completed, they can be accepted with confidence.