JIANGSU RUINENG ANTICOROSSION EQUIPMENT CO., LTD Fluoropolymer Lined ISO containers and ISO tanks are all manufactured by advanced lining technology, which can even meet a high purity quality demand in semiconductor industries.
RANA commits to delivering high-quality lined ISO tanks and containers, we truly care about the equipment and buyer's feedback we serve. we will keep 7*24h response all year round.
â— According to the requirements, after RANA strict material selection, production processing control, factory inspection, etc., the general anti-corrosion service life of our tanks can reach 10 years.
With our nearly 30 years of anti-corrosion experience, RANA will customize anti-corrosion solutions for special demanding anti-corrosion requirements.
RANA storage tanks are lined with fluorine materials such as PFA, PTFE, ETFE, ECTFE, PVDF, NEW-PTFE etc. PTFE lining storage tank with carbon steel and stainless steel housing.
Whether you are using for storing, mixing or filtering, we have a Lined Tank for you.
Lined PTFE,Lined PFA,Lined ECTFE,PTFE Lined Iso Tank,PFA Lined Container,Lined container,ECTFE Lined Iso Container,lined PTFE GBK,Lined Containerssheet, Lined PFA GBK sheet JIANGSU RANA FLUORINE MATERIAL TECHNOLOGY CO., LTD , https://www.ranatank.com
2. Turn on the power and the red indicator light of OFF is on. Rotate the temperature control knob to the set temperature (clockwise temperature increase, counterclockwise temperature decrease). The water starts to be heated and the indicator light is on. When the temperature rises to the set temperature, The indicator light turns off and the water starts to be heated.
3. After the water bath is heated, the container containing the item to be heated is placed in a water bath to start constant temperature.
4. In order to ensure the effect of constant temperature during constant temperature, the thermostatic container can be sealed with cardboard in the area where the container is in contact with the container. The thermostatic container in the thermostatic container should be lower than the constant temperature water bath surface of the water bath.
5, after use, remove the thermostat, turn off the power, eliminate the water inside the box. And make a good record of instrument use.
6, maintenance:
(1) The water tank should be placed on a fixed platform. The power supply voltage of the instrument should be 220V. The power outlet should use a three-hole mounting socket and must be installed with a ground wire.
(2) Before water is added, cut the power supply, and during use, the water level must be higher than that of the stainless steel partition. Do not heat water or the water level is lower than the partition, otherwise it will damage the heating pipe.
(3) If the constant temperature control fails, the silver contact on the controller can be polished with a fine emery cloth to work.
(4) Water should not be poured into the control box during water injection to prevent electric shock. After use, the water in the box should be drained in time, wiped clean, and kept clean to facilitate the prolonged service life.
(5) It is best to use purified water to avoid scale formation.
1. The electronic constant-temperature water bath should be placed on a fixed platform, first clamp the drain hose, and then inject clean water into the water bath pot body (to shorten the heating time, you can also inject hot water).