With the development of modern machinery processing industry, the requirements for the quality and precision of cutting have been continuously improved, and the requirements for improving production efficiency, reducing production costs, and having high-efficiency automatic cutting functions are also increasing. As a part of the cutting machine industry, the products we provide will be the most modern and technological. Welcome everyone to discuss cooperation. Details:/
Since the height of the filling is close to the tower top, the water eliminator does not occupy much space, and the overall height of the cross-flow tower is small, which makes it relatively compact compared with counter flow type, and therefore lower air inlet speed and power consumption as well.
The cross-flow tower adopts a water distribution system that will let the water drop fall naturally by gravity. Thereby, water distribution holes are not easy to be blocked, as water distribution is even and maximizes the performance of the tower fillings. The inspection manhole also enables routinely maintenance without machine shutdown.
A lower part of the cross-flow tower filling is submerged in the water, so that the water flows through the surface of the filling and directly falls into the below tank, making low noise.
The cross-flow tower fan is located in the middle of the Cooling Tower, while the filling, on both sides of the tower. So the amount of splashing water is very small.
Cross Flow Cooling Tower,Cooling Tower Cools Water,Induced Draught Cooling Tower,Induced Draft Cross Flow Cooling Tower Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjm.com
Fiber laser cutting machine is currently the most advanced laser cutting equipment, showing very superior cutting performance. However, long-term operation and use, in order to ensure the cutting effect of the fiber laser cutting machine, replacement of wearing parts (protective lenses and copper mouthpieces) is inevitable.
According to the normal normal use, the normal use of the fiber laser-cut protection lens is 400 hours, and the use of the copper mouth is about 700 hours. However, when the customer frequently uses the equipment, the consumable parts are frequently replaced. What is this? What caused it?
1. Fiber laser cutting machine has a long use time; the machine also has a life span, and the longer the equipment is used, the slower the performance will be, so the dependence on consumable parts consumables is relatively high.
2. The fiber laser cutting machine has not been maintained for a long time; because the working environment of the fiber laser cutting machine is relatively poor, and the laser belongs to the optical device, the cleanliness requirement is very high. If it is not cleaned and maintained for a long time, the performance will be reduced, resulting in Wearing of consumables is faster.
3. Regular processing of high anti-metal materials; some metal materials are highly reflective materials, such as copper, aluminum and other materials, the poor absorption of the laser, a small part will be launched back, causing damage to wearing parts, resulting in wearing parts consumables Too fast.
Therefore, customers who frequently replace the supplies of fiber laser cutting machines must pay attention to it. We must always do a good job of maintaining and overhauling the fiber laser cutting machines to ensure that the equipment is in good operation. [China Cutter Trading Network is now returning new and old members, especially The introduction of advertising space for free experience activities is a golden opportunity, on a first-come-first-served basis. Log on to the official website for the latest information:/
Editor: zgqgjjyw