Trademark: YB
Specification: 12VDC
Origin: China
HS Code: 8413110000


Submersible Diesel Fuel Transfer Water Oil Pump DC12V
Submersible Diesel Fuel Transfer Water Oil Pump DC12V
Submersible Diesel Fuel Transfer Water Oil Pump DC12V
Submersible Diesel Fuel Transfer Water Oil Pump DC12V
Submersible Diesel Fuel Transfer Water Oil Pump DC12V
Submersible Diesel Fuel Transfer Water Oil Pump DC12V

Description

You need use this 12V mini submersible pump in rapid transfer with no spillage of diesel fuel, water and thin oils from storage tanks to various vehicles. (Not for use in transfer petrol and other volatile liquids.)
Features:
100% Brand New.
Size: 20cmx5.0cm
Test Voltage: DC12V
Motor Racing Speed: 8500r / min
Motor racing current: 0.2A
Pump running current largest: 1.5A
Flow rate: 30L / min
Wire length:0.3MM*2.3M
Remark:
1.When it works, first should put clean diesel pump in the middle of diesel bucket, does not allow empty load operation.
2.Pay attention to the load capacity of bucket when the pump is running, do not exceed load capacity line.
3. The pump is strictly prohibited pumping gasoline, alcohol and other flammable liquids
4.The oil hose is self-provided (Not included)
5.The pump mainly smoke diesel, flow rate:30L / min.
6. The outer diameter 50mm
7. The maximum oil-out diameter is 17mm
8.Don't make change the anode and cathode of battery clamp when clip the battery.
For use in rapid transferring with no spillage of diesel fuel, water and thin oils from storage tanks to various vehicles.
Submersible transfer pump suitable for diesel water and other non flamable fluids. Heavy duty construction stainless steel body and built in strainer filter. Complete with approximately 3 metre 12 volt power cord and in-line switch, the power cord is equipped with battery terminal clips but you can discard these and hardwire the pump to your vehicle if you wish. Leave to cool after periods of 20 minutes use and run the engine if using for long periods to conserve the vehicle battery
Package list:
1 x Mini DC 12V Oil pump 12L
1x filter
1x clip

Mini Plastic Parts Making Machines

Small size plastic injection moulding machines specially produce high procison mini plastic parts with fast response, stable quality.

Vertification of many year's market application, optimal combination configuration, stable, reliable and durable system with the characteristics of high efficiency, energy saving, low voice and strong power.

Program control adopts multiple CPU and high-end DSP chip, which guaranteed smooth and stable control property during high load processing.

BUlk-storage memory that can store many groups of technological parameter.

The application of USB can realize online updating, data export and simple operation.

IMG_8446

Mini Plastic Parts Making Machines,Plastic Parts,Mini Making Machines,Mini Coaxial Cable

Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyong-machinery.com