1. After placing the lamp stably, take out the lamp head and fix it on the upper end of the lifting rod and make the lamp head vertical, and the locking device on the rear plate tightening rod;
2. After confirming that the lamp head is fixed, the lifting rod can be lifted from top to bottom according to the lighting brightness requirements; after lifting each section of the lifting rod in place, the corresponding wrench must be pressed and fixed;
3. If you need to adjust the lighting angle and direction of the lamp cap, you can loosen the hand-tight nut that fixes the lamp cap, adjust it as needed, and then tighten it;
4. Turn on the lamp switch and refer to the "Instruction Manual". In order to ensure the normal discharge time of the lamp for 16 hours, the lamp function needs to be adjusted to the state of the work lamp;
5. After use, first turn off the lamp switch on the control panel of the lamp, and open the wrench corresponding to the lifting rod section by section from bottom to top, so that the lifting rod slides down smoothly into place; unscrew the hand nut and return the lamp head to this position. Attention should be paid to the hot surface of the lamp head, the lamp head is inserted into the corresponding position of the box, close the cover of the lamp, lock the hand, and then tighten the handle nut;
Water Filter Cartridge, PP Sediment Filter Cartridge, Carbon Filter Cartridge, RO Membrane, regular RO system filter supplier.
Provide different RO System Water Filter Cartridge solutions depends on your local market.
Any questions, feel free to get in touch with Filterelated team, filterelated@gmail.com are ready to serve you!
Water Filter Cartridge,PP Filter,Carbon Filter,RO Membrane
