2CPV Table Model Tube End Finish Machine Description: Table Model Tube End Finish Machine Model: 2CPV Application:Used for deburring,flaring,Beading for Inside and outside of metal round tube end. Introduce: Using the tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -a change of tooling is all that is required to switch from one function to another. Main Specification:
Dimensions: Long X Wide X High (excluding protruding parts) =460X650X380mm
Weight: 160 kg
Power supply: 220V±10%, 50Hz/60Hz, single phase
Power: 1 KW
Air pressure: 0.4-0.8MPa;
Clamping mode: pneumatic;
Clamping force:>=5KN;
Rotation axis: asynchronous motor, 0.75kw;
Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
Tube min clamp: 10mm (flare tube is based on material and wall thickness);
Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;
Features:
One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
After quick change dies, it can complete the tube flaring processing and beading.
Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
Operating lever and clamping cylinder joint together, when pull the operating lever, the cylinder clamping automatic clamping tube, then the main shaft forward, after the processing complete, release lever, spindle retreat, cylinder clamping automatically open.
Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
Tube feeding length positioning function, ensure tube process length and repeat precision.
Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
Main Components:
The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
Variable frequency control of motor, to achieve the spindle high precision control.
Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
The clever design chip groove in clamp, lead the dust smoothly into waste box.
The mechanical lever of connecting rod reduces the feed speed, operation more smooth and efficient.
Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.
Tooling:
Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness.
Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading.  Â
2CPV Table Model Tube End Finish Machine Description: Table Model Tube End Finish Machine Model: 2CPV Application:Used for deburring,flaring,Beading for Inside and outside of metal round tube end. Introduce: Using the tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -a change of tooling is all that is required to switch from one function to another. Main Specification:
Dimensions: Long X Wide X High (excluding protruding parts) =460X650X380mm
Weight: 160 kg
Power supply: 220V±10%, 50Hz/60Hz, single phase
Power: 1 KW
Air pressure: 0.4-0.8MPa;
Clamping mode: pneumatic;
Clamping force:>=5KN;
Rotation axis: asynchronous motor, 0.75kw;
Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
Tube min clamp: 10mm (flare tube is based on material and wall thickness);
Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;
Features:
One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
After quick change dies, it can complete the tube flaring processing and beading.
Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
Operating lever and clamping cylinder joint together, when pull the operating lever, the cylinder clamping automatic clamping tube, then the main shaft forward, after the processing complete, release lever, spindle retreat, cylinder clamping automatically open.
Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
Tube feeding length positioning function, ensure tube process length and repeat precision.
Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
Main Components:
The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
Variable frequency control of motor, to achieve the spindle high precision control.
Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
The clever design chip groove in clamp, lead the dust smoothly into waste box.
The mechanical lever of connecting rod reduces the feed speed, operation more smooth and efficient.
Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.
Tooling:
Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness.
Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading.  Â
This unit uses dual extruders and dual tractors to compound multiple substrates by casting, and complete the bright compounding process of the front and back of the plastic woven bag in one production process. The unit has high degree of automation, advanced technology and convenient operation. The whole machine adopts PLC operating system, linkage control, automatic temperature control of each extruder, automatic suction, and the composite product has strong adhesion fastness, good effect, uniform thickness and good sealing performance.
The cement bag perforating needle rollers and woven bag perforating needle rollers developed by our company adopt imported alloy steel wire needles with high strength and good abrasion resistance. With advanced drilling technology, the processing precision reaches the same level in the world.
The base material of this series of needle rollers generally adopts hard aluminum alloy and copper alloy, which has the characteristics of good quality, low price, economical and practical.
Our company specializes in the supply of woven bag needle rollers, cement bag needle rollers, and woven bag needle rollers wholesale. The product quality and processing technology reliability and stability are at the domestic advanced level. We can produce various special specifications of needle rollers according to customer requirements. Needle ring products. Customers are welcome to consult.
non-woven needle roller,Automatic punching machine equipment, woven bag double-sided punching machine, cement bag punching needle roller, woven bag punching needle roller, Cement bag woven bag ultra-micro hole punching machine
Â