According to the regulations of the State Grid, the proportion of distributed generation such as photovoltaics and wind power cannot exceed 10% of the grid, and the energy storage system must be added if it exceeds. Since photovoltaic systems and wind power systems do not use energy storage systems when they are connected to the grid for power generation, it will bring some adverse effects to the power grid. These effects become impossible to ignore. Through the analysis of the characteristics of photovoltaic power generation, it can be seen that the influence of photovoltaic power generation system on the power grid is mainly caused by the instability of photovoltaic power supply. The demand for energy storage systems has increased over the years.
The stable operation of the energy storage system is related to the safety and stability of the power grid, so the major energy storage system manufacturers attach great importance to its quality, and among the factors affecting the stability of the energy storage system, the heat dissipation performance is undoubtedly the most important. Trumony focuses on high-power heat dissipation and has rich experience in the R&D and manufacturing of heat sinks for energy storage systems. Trumony`s thermal management engineers can provide heat dissipation solutions from the beginning of the design of the energy storage system, and can also provide cooling solutions for energy storage systems. The system is optimized for thermal performance. By accumulating rich thermal design data, Trumony can provide accurate thermal simulation and thermal management test data.
snake tube for ESS,snake tube for energy storage,serpentine tube for battery pack Trumony Aluminum Limited , https://www.szaluminumcoil.com
First: Regional Environment
The gas consumption in different regions is not the same, because the outside temperature is not the same, so the indoor temperature is not the same, and the gas consumption to reach the same indoor temperature will be different. For example, compared with Harbin, Shanghai, the consumption of gas is obviously different.
Second: Housing insulation
In general, the better the insulation performance of the wall or the outer window is, the more energy-efficient the gas fireplace is. Customers are advised to pull up the curtains as much as possible to prevent the loss of heat. Conditional users can install double-glazed windows.
Third: the surrounding environment
Whether the surrounding neighbors or the upstairs and downstairs are heated will also affect the size of their own heating and air consumption. If the ambient temperature is low, the heating temperature needs to be increased, and the use of wall-hung boilers will increase accordingly, and the gas consumption of wall-hung boilers will increase accordingly.
Fourth: Heading and Layers
In general, the gas consumption of the top floor and the first floor is relatively large. That is because there is no heat loss caused by heating upstairs or downstairs. In addition, the southerly air consumption is lower than that of the north-facing homes because the south-facing houses are full of light and have relatively large amounts of heat.
Fifth: Use habits
No matter what brand or quality of the boiler, it must be used correctly. If it is used incorrectly, it will affect the gas consumption of the boiler. For example, some people use the method of lowering the temperature instead of opening or closing, which is more energy-saving to a certain extent. For example, if the room temperature is increased twice, the air consumption will increase by about 10%.
Of course, in addition to the factors described above, there are also other factors that can affect the gas consumption of gas boilers, including the service life of boilers, the size of houses, the layout of rooms and radiators, and so on.
Shanghai Shure Environmental Technology Co., Ltd. Tel
Winter is over. One of the questions many owners care about is how much gas is in your home last winter. The same area of ​​the house is the same as floor heating or heating radiators. Why is the amount of gas used so much different? What is the difference in the amount of gas inside is how much money ah, many customers are not very understanding. What affects the gas consumption of the boiler?