What manufacturers need to know to purchase furniture equipment What are the problems that manufacturers pay attention to when buying furniture equipment ? In the era of rapid development, manufacturers are paying more and more attention to the quality of products, and also ensuring that the quality of products needs to be evaluated by test equipment. This will inevitably cause more and more companies to pay attention to it. As furniture manufacturers, what should pay attention to the purchase of furniture testing equipment ? Haida equipment based on years of production experience for everyone to explain in detail. First, the performance requirements of furniture testing equipment 1 , the temperature set value: the desired temperature set by the control device ; 2. Temperature gradient: the maximum value of the difference between the average temperatures of any two points in the working space after stabilization ; 3. The temperature fluctuation: after the stabilization, the difference between the maximum and minimum temperatures at any point in the space ; 4. The working room The difference between the wall temperature and the working space temperature: 1) The high temperature level should not exceed 3% of the test chamber temperature. 2) The low temperature level should not exceed 8% of the test chamber temperature . 5 , Temperature deviation: ± 2; 6, the rate of temperature change: measured at the center in the working space to the transition rate between two given temperature to ℃ / min units; Second, furniture testing equipment structure requirements 1. The inner wall should be made of materials that are not resistant to oxidation and have a certain mechanical strength ; 2 , insulation materials should be able to withstand high temperatures and have flame retardant properties. ; 3 , heating and cooling device heat and cooling should not be directly radiated on the test sample ; 4. The door should be sealed well, and the sealing condition has good anti-high temperature aging and low temperature hardening resistance ; 5 , the refrigeration system should not have leakage, leakage, oil leakage defects ; 6. There should be sample holders for placing or hanging test specimens. The sample rack should have sufficient high temperature and low temperature performance. 7 , lead wire lead should be provided ; Third, furniture testing equipment safety and environmental requirements: 1 , insulation resistance value should meet the following three requirements: 1) cold 2M Ω or more 2) Withstanding voltage test of 1M Ω or more in thermal state and capable of withstanding 50Hz AC voltage of 1500V and applying pressure for 5s ; 2. The protective earthing terminal should be firmly connected to the equipment shell and meet the requirements of 7.1.9 of GB/T14048.1-2000 ; 3 , with over-temperature, over-current, water and other protection and alarm devices ; 4 , the whole machine noise should not exceed 80dB (A) . The above three requirements are the manufacturers need to pay attention to when purchasing, it is best to go to the purchase of the workers in the field visits, multi-faceted understanding is always good, if you want to know more about inquiry Haida Instrument Co., Ltd.. Electrodes Press Blades,Anode Slicing Blade,Cathode Slicing Blade,Battery Pole Piece Press Blade Guangdong Rixin Precision Technology Co., Ltd. , https://www.nissonmold.com