For high-altitude vehicles that often operate in the old city, sometimes because of poor parking conditions, tires and lacquer are more prone to problems. It is worth mentioning that the streets in the old city are relatively narrow, and the parking of high-altitude vehicles sometimes needs to stop at the roadbed. At this time, if you do not pay attention to coping skills, it is easy to increase the possibility of tire bulging. In addition to tires, the service life of shock absorbers will also be shortened. In addition, the front and rear bumper positions, and the lacquer parts near the front and rear lights will also be easily “injured†for this type of vehicle. As for the braking system, because high-altitude trucks are driving for a long time during traffic jams, if the driving habits of the aerial vehicle owners are poor, the service life of the brake pedal will be shortened. At the same time, frequent brakes for a long time will also cause serious wear of the brake pads. The brake effect is reduced, the brakes are not returned, and if the brakes have large friction or sharp sounds, they all prove that the brake system has a problem, indicating that the vehicle should replace the brake pads in advance. At the same time, the high-altitude vehicle engine is running at a low speed for a long time. The probability of carbon deposition will also increase significantly. Clamp, C Clamp, Table Clamp, Desk Clamp, Microphone Clamp, Office Partition Clamp, Glazing Desk Clamp, Desk Screen Clamp, Monitor Arm Clamp, Pipe Clamp, Tube Clamp MGX Metalworks Co., Ltd. , https://www.metal-mgx.com
The maintenance cycle of high-altitude trucks often used in the old city is easy to shorten parts: paint, brake pads.