1. The cutting speed of the board divider can be set to high or low.
2. Maximum travel of knife wheel: 600mm.
3. Knife wheel micro-adjustment: 0-2mm.
PCB separator,PCB cutting machine,V-cut pcb separator,V-cut pcb machine SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com
This device was developed by Wuhan Lide Technology Co., Ltd. The automatic operating system of coke oven coke trucks is used in some large coking enterprises in China, but they are all imported foreign technologies. In February of last year, WISCO Coking Company introduced the company's technology in the No. 7 and No. 8 coke ovens. After the installation and experimental stage, it was put into use in May this year. This technology is to determine the address by coding on the coke oven, and then through the PLC system to start and stop the inverter, and finally realize the automatic movement and automatic positioning of the coke tank car, and realize the advanced technology of this set of technology and coke oven dry quenching equipment. A seamless combination of technologies. After 3 months of operation, after identification, the auto-running and automatic operating system of the coke tank realized 98% of unmanned and unmanned operation, which greatly reduced the labor intensity of workers and fully met the production needs.
5. Backstop depth adjustable range: 0-150mm, maximum PCB board cutting width: 150mm, maximum PCB board cutting length: 400mm
6. Thickness: 0.2-3.2mm, maximum thickness between V-slots: 0.25-2.0mm
7. Connecting multiple pieces of PCB board in the solder, folding often hurt the line, or will be broken electronic parts, the use of the board splitter can avoid damage, and can improve efficiency and quality.
8. With the walking knife type board splitting machine to divide, can completely reduce the stress, to prevent the cracking of solder joints and parts breakage.
9. Using the upper circular knife under the flat knife method, PCB board to the board splitting machine under the flat knife, switch a step, the upper circular knife moving across to the set point, the PCB board will be cut off and divided, cut off without stripping, the cut is flat.
10. Slitter knife travel can be set at will with the length of the PCB board forward stopping fixed point, stopping fixed point for 0-100-200-300-400mm.
11. Cutter back with cut-off length stopper, according to the different width of the PCB board to do the adjustment, for no V-CUT slot PCB board can also easily cut the board, accurate not oblique cut.
12. Can fine-tune the thickness of various PCB boards, to solve the problem of PCB board V-CUT slot depth.
On August 23, China's first self-developed coke oven device, the automatic operating system of WISCO No.7 and No.8 coke oven coke drums, was approved by WISCO Coking Company. The appraisal team consists of experts from the WISCO Technical Department, the Automation Department, the Equipment Department and the Coking Company.