Digital Soldering Station 300W Soldering Iron Holder Desoldering Tool

 

Applications:

1.The electronic industry for the electronic product assembly 

2.Used in scientific research department to product development

3.for the electronics maintenance in the electronic industry

4.Enterprise or business unit's electrical soldering work

5.Electronic technology enthusiasts for the electronic product assembly

6.Apply to all kind of the college 's Electrician lab 

 

Features:

1.The whole welding machine using electrical conductivity materials, specially designed for preventing static electricity and clean indoor environment (ESD) 

2.Heating element made of imported material with advanced technology of heat-resistant, long service life

3.Heating element using low voltage ac source, to ensure the antistatic, no leakage, no interference

4.50 ~ 530 ºC temperature setting and control the stable and accurate

5.Rapid warming

6.Handle special lightweight, use for a long time without fatigue

7.Completely isolated heating element with the main power grid

8.Soldering iron parts in aviation joint and high temperature resistance of antistatic silicone rubber (silicone) cable connected to the temperature control table

9.Unique temperature locking devices, guard against temperature platitude

10.Separation design, easy to put

 

Precaution

When the power is on, the temperature is between 200°c/392°F and 480°c/896°F. Since mishandling may lead to burns or fire, be sure to comply with following precautions:

1. Do not touch the metallic parts near the tip

2. Do use the product near flammable items

3. Advise other people in the work area that the unit can reach a very high temperature and should be considered potentially dangerous.

4. Turn the power off while taking breaks and when finished using the unit

5. Before replacing parts or storing the unit, turn the power off and allow the unit to cool down to room temperature

To prevent damage to the unit and ensure a safe working environment, be sure to comply with the following precautions:

1. Do not use the unit for applications other than soldering.

2. Do not rap the soldering iron against the work bench to shake off residual solder, or otherwise subject the iron to severe shocks

3. Do not modify the unit

4. Use only genuine replacement parts

5. Do not wet the unit or use the unit when your hands are wet

6. The soldering process will produce smoke, so make sure the area is well ventilated.

7. While using the unit, do not do anything which may cause bodily harm or physical damage.





Tip Care & Use

Tip Temperature---High soldering temperatures can degrade the tip. Use the lowest possible soldering temperature. The excellent thermal recovery characteristics ensure efficient and effective soldering even at low temperatures. This also protects the soldered items from thermal damage.

Cleaning---Clean the tip regularly with a cleaning sponge, as oxidesa and carbides from the solder and flux can form impurities on the tip. These impurities can result in defective joints or reduce the tip's heat conductivity. When using the soldering iron continuously, be sure to loosen the tip and remove the oxides at least once a week. This help prevent seizure and reduction of the tip temperature.

When not in use---Never leave the soldering iron sitting at high temperature for long period of time as the tip's solder plating will become covered with oxides, which can greatly reduce the tip's heat conductivity.

After Use---Wipe the tip clean and coat the tip with fresh solder. This helps prevent tip oxidation.


Maintenance

Inspect and clean the tip

1. Set the temperature to 250°c (482°F)

2. When the temperature stabilizes, clean the tip with the cleaning sponge and check the condition of the tip.

3. If there is black oxides on the solder-plated portion of the tip, apply new solder (containing flux) and wipe the tip on the cleaning sponge. Repeat until the oxide is completely removed. Coat with new solder.

4. If the tip is deformed or heavily eroded, replace it with a new one.

Caliberating  the Iron Temperature

The soldering iron should be recaliberated after changing the iron or replacing the heating element or tip

1. Connect the cord assembly plug to the receptacle on the station

2. Set the temperature control knob to 400°c (750°F)

3. Turn the power switch to 'ON' and wait unit the temperature stabilizes. Remove the CAL pot plug

4. When the temperature stabilizes, use a straight -edge(-) screwdriver or small plug(+) screwdriver to adjust the screw (marked CAL at the station) until the tip thermometer indicates a temperature of 400°c (750°F). Turn the screw clockwise to increase the temperature and counterclockwise to reduce the temperature. Replace the CAL pot plug

 

Applications:

1.The electronic industry for the electronic product assembly 

2.Used in scientific research department to product development

3.for the electronics maintenance in the electronic industry

4.Enterprise or business unit's electrical soldering work

5.Electronic technology enthusiasts for the electronic product assembly

6.Apply to all kind of the college 's Electrician lab 

 

Features:

1.The whole welding machine using electrical conductivity materials, specially designed for preventing static electricity and clean indoor environment (ESD) 

2.Heating element made of imported material with advanced technology of heat-resistant, long service life

3.Heating element using low voltage ac source, to ensure the antistatic, no leakage, no interference

4.50 ~ 530 ºC temperature setting and control the stable and accurate

5.Rapid warming

6.Handle special lightweight, use for a long time without fatigue

7.Completely isolated heating element with the main power grid

8.Soldering iron parts in aviation joint and high temperature resistance of antistatic silicone rubber (silicone) cable connected to the temperature control table

9.Unique temperature locking devices, guard against temperature platitude

10.Separation design, easy to put

 

Precaution

When the power is on, the temperature is between 200°c/392°F and 480°c/896°F. Since mishandling may lead to burns or fire, be sure to comply with following precautions:

1. Do not touch the metallic parts near the tip

2. Do use the product near flammable items

3. Advise other people in the work area that the unit can reach a very high temperature and should be considered potentially dangerous.

4. Turn the power off while taking breaks and when finished using the unit

5. Before replacing parts or storing the unit, turn the power off and allow the unit to cool down to room temperature

To prevent damage to the unit and ensure a safe working environment, be sure to comply with the following precautions:

1. Do not use the unit for applications other than soldering.

2. Do not rap the soldering iron against the work bench to shake off residual solder, or otherwise subject the iron to severe shocks

3. Do not modify the unit

4. Use only genuine replacement parts

5. Do not wet the unit or use the unit when your hands are wet

6. The soldering process will produce smoke, so make sure the area is well ventilated.

7. While using the unit, do not do anything which may cause bodily harm or physical damage.





Tip Care & Use

Tip Temperature---High soldering temperatures can degrade the tip. Use the lowest possible soldering temperature. The excellent thermal recovery characteristics ensure efficient and effective soldering even at low temperatures. This also protects the soldered items from thermal damage.

Cleaning---Clean the tip regularly with a cleaning sponge, as oxidesa and carbides from the solder and flux can form impurities on the tip. These impurities can result in defective joints or reduce the tip's heat conductivity. When using the soldering iron continuously, be sure to loosen the tip and remove the oxides at least once a week. This help prevent seizure and reduction of the tip temperature.

When not in use---Never leave the soldering iron sitting at high temperature for long period of time as the tip's solder plating will become covered with oxides, which can greatly reduce the tip's heat conductivity.

After Use---Wipe the tip clean and coat the tip with fresh solder. This helps prevent tip oxidation.


Maintenance

Inspect and clean the tip

1. Set the temperature to 250°c (482°F)

2. When the temperature stabilizes, clean the tip with the cleaning sponge and check the condition of the tip.

3. If there is black oxides on the solder-plated portion of the tip, apply new solder (containing flux) and wipe the tip on the cleaning sponge. Repeat until the oxide is completely removed. Coat with new solder.

4. If the tip is deformed or heavily eroded, replace it with a new one.

Caliberating  the Iron Temperature

The soldering iron should be recaliberated after changing the iron or replacing the heating element or tip

1. Connect the cord assembly plug to the receptacle on the station

2. Set the temperature control knob to 400°c (750°F)

3. Turn the power switch to 'ON' and wait unit the temperature stabilizes. Remove the CAL pot plug

4. When the temperature stabilizes, use a straight -edge(-) screwdriver or small plug(+) screwdriver to adjust the screw (marked CAL at the station) until the tip thermometer indicates a temperature of 400°c (750°F). Turn the screw clockwise to increase the temperature and counterclockwise to reduce the temperature. Replace the CAL pot plug

Applicable industry:
Used for the drilling processing of H-shape steel, box beam and channel steel of steel structure, bridge, three dimensional garage and petrol platform. It is designed for medium size steel fabricators desiring to increase profitability and throughput (tons-per-month) in today`s extremely competitive market.

Product feature:

1.    Equipped with three drilling units, three drilling units can drill holes simultaneously and adopt self-controlled stroke drilling head.

2.    No need to set thickness of work piece and length of drill bits, it will do fact-feeding or feeding automatically by sensor signal, and with high efficiency.

3.    Frame made of sturdy electro-welded and normalized Plates and Square Beams. The structure with roller guides on which the sliders supporting the three spindles guarantees the total moving stability, and ensures the working precision;

4.    This machine can read AUTOCAD drawings and lofting software files automatically, such as DXF, NC1.

5.    Equipped with automatic lubrication system and air conditioner for electric cabinet.

6.    Equipped with automatic feeding systems, which will clamp and feed material into machine automatically.

7.    PLC systems, programming based on WINDOWS, fast and convenient programming, and visual previewing.

8.    Drilling units equip with famous brand spindle motor.

9.    The key mechanical, hydraulic and electric parts are all famous brands.

The machine equipped with chip removal carriage, this carriage on the bottom of the main machine, when drilling, the chips drop into the carriage, the carriage have pulley, when the carriage is full, with the help of crane lift the carriage to clean up.

When working, some parts of this machine need often to be lubricated, like linear guides, ball screws and so on. With this unit, workers don`t need to lubricate those parts manually. (The lubrication oil is not cycle)

The cooling system is the type of spray, and quickly evaporate, it`s just damp, will not have much water, so don`t need the special collector for the cooling water.

Packing & Delivery
Packing Details  : Packing, this model need 1*20GP;
Delivery Details : 30-50 days after get the first payment.


1. Special logistics packaging
2. Suitable carton size
3. Fasten
4. Professional placement
5. Professional shock
6. Complete package

Our Certifications

SUNRISE is focus on quality and company's image. We win market with good quality and service. The company has already passed International Quality Management System ISO9001:2008 certification for many years and also got the CE certificate, smoothly got the title of High and New Tech Enterprises. And has more than ten own intellectual property rights and patent technology. We have own import and export right. Our products exported to Russia, South Asia, South east Asia, Middle East, South America, Africa, Australia, Eastern Europe etc.

Beam Drilling Machine

Beam Drilling Machine,3D Beam Drilling Machine,Beam Drilling Sawing Machine,CNC Beam Drilling Machine

Jinan Sunrise CNC Machine Co., Ltd , http://www.scmcnc.com