The chute beating is a process of selecting and dividing by the method of bevel water flow. The mixture of mineral particles is fed into a chute with a small inclination, generally 3° to 4° , and not more than 6° . The ore particles are stratified by density under the action of the momentum of the water flow, the gravity and centrifugal force of the ore particles, and the frictional force. Since the velocity distribution of the water flow in the trough is small in the upper and lower layers, the denser ore particles are concentrated in the lower layer, and are subjected to less water flow force and larger groove bottom friction force, and slowly move forward along the groove bottom, and the density is small. The ore particles are concentrated in the upper layer and are carried by the water stream to flow out of the tank at a faster rate. Then, the two product concentrates and tailings with different densities can be obtained by intercepting the layers separately. MT Series conveyors include equipment used as link for SMT machines during production process. MT Series conveyors include automatic and smart conveyors, automatic translational conveyor, automatic inverting machine, and automatic aisle conveyor. This equipment`s are suitable to any SMT production line link MT Series Conveyor Link models also have different sizes tailor made to fit any PCB dimensions and match any machine specification. To learn more about MT Series Conveyor Links, please feel free to contact us. Conveyor Link Conveyor Link,PCB Inverter Conveyor,SMT Translational Conveyor,Smart Conveyor Unit ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com