Reaming of aluminum reaming parts generally adopts carbide, coated carbide, and PCD reamers. Generally, the built-up edge is the biggest problem in processing aluminum parts. The generation of built-up edges will lead to adverse effects such as enlarged pore size and excessive roughness. Aluminum Reaming Parts,Precision Reaming Parts,Metal Lathe Reaming,Cnc Laser Metal Pro Success Development Limited , https://www.prosuccess-metal.com
China is already a big mold country. After many years of ups and downs, the mold industry has made great progress. Although there has been some improvement in technology and quality, the life of the mold is still the industry's most worried issue.
In this regard, related experts said that we must start from the following aspects: First, carry out effective product data management, process data management, drawing document management; this can ensure the comprehensiveness of the document, the consistency of the drawing version; can establish a complete Document management computer database, the design drawings accumulated by the design department, scattered, and the previously scattered, isolated information collated and used, to prevent the confusion of 2d, 3d due to design drawings, original, set-up, maintenance version confusion, 3d model Inconsistent with 2d drawing data. Second, to maintain the consistency and completeness of the data of the mold drawings, processing techniques, and physical objects: to ensure the consistency and completeness of the data of the mold drawings, processing techniques, and physical data through effective, meticulous, and rigorous testing methods. . Third, the cost of designing and manufacturing each mold must be summarized in a timely manner. Fourth, develop a complete and practical mold production management system. Through these aspects, we can effectively improve the life of the mold, and promote the mold industry to develop better.
On the whole, the PCD reamer can use a higher linear speed, effectively avoiding the generation of a built-up edge.
But if the cemented carbide tool is designed properly, it can also be processed with good precision. Especially for the use of coated tools, the correct selection of the corresponding coating can not only meet the accuracy requirements, but also have the advantages of stable wear resistance and chemical properties, heat resistance and oxidation resistance, small friction factors, and low thermal conductivity. However, coated blades are not as sharp as uncoated knives because the cutting edge is passivated when the knives are coated. The sharp cutting edge can also effectively prevent the formation of a built-up edge, so the processing of aluminum alloy tools is generally not coated.
If you need CNC laser metal or Lathe Reaming Service including metal lathe reaming to produce precision reaming parts, etc., please contact us.