Portable Hand Held Metal Detector Body Scanner Detector with Rechargeable Battery

good quality metal detector super scanner hand held metal detector 

MD3003B1 hand held metal detector

MD3003B1 hand held metal detector is also called small landmine detector, extensively used in landmine excavation force in the army.
Easy Operation, exquisite design, convenient storage, large detecting area, stable performance and low trouble rate.
High sensitivity, objects with the size of a pin or smaller can be detected easily. Sensitivity can be adjusted according to actual application.
The best about this model is that, it's most cost-efficient among models of the same category.

 

Package include:
1 x metal detector
1 x belt holster
1 x english manual

 

Key features of MD3003B1 hand held metal detector:
Mini type ,Simple operation
High sensitivity : can detect the size of pin .
When metal is detected with the sound ( or vibration ) and light alarm function
The alkaline battery alarm proportion of 10 % to 15 % of work , can work for 40 hours .
9V battery the alarm will automatically continuous

 

Parameters of MD3003B1 hand held metal detector:

Applications of MD3003B1 hand held metal detector: 
Airports , railway stations , docks , prisons , customs , border control and other security departments of security checks;
Medicine, food , commercial quality inspection system;
Precious metal detection ( such as gold and silver jewelry factory ) , and other security checks.

Notes :
1, When the sensitivity adjustment too high, the boot will be issued after the continuous alarm sound, the sensitivity can be reduced.
2, Cut off the power after use. Long-term should not remove the battery to prevent overnight, so as not to damage the circuit.
3, The probe is fixed against a crackling sound when the metal will stop only when the metal continues to sweep audible.
4.When turned on, the green light to dark and continuous alarm indicates that the voltage is less than has been unable to work , you should replace the battery .







 

good quality metal detector super scanner hand held metal detector 

MD3003B1 hand held metal detector

MD3003B1 hand held metal detector is also called small landmine detector, extensively used in landmine excavation force in the army.
Easy Operation, exquisite design, convenient storage, large detecting area, stable performance and low trouble rate.
High sensitivity, objects with the size of a pin or smaller can be detected easily. Sensitivity can be adjusted according to actual application.
The best about this model is that, it's most cost-efficient among models of the same category.

 

Package include:
1 x metal detector
1 x belt holster
1 x english manual

 

Key features of MD3003B1 hand held metal detector:
Mini type ,Simple operation
High sensitivity : can detect the size of pin .
When metal is detected with the sound ( or vibration ) and light alarm function
The alkaline battery alarm proportion of 10 % to 15 % of work , can work for 40 hours .
9V battery the alarm will automatically continuous

 

Parameters of MD3003B1 hand held metal detector:

Applications of MD3003B1 hand held metal detector: 
Airports , railway stations , docks , prisons , customs , border control and other security departments of security checks;
Medicine, food , commercial quality inspection system;
Precious metal detection ( such as gold and silver jewelry factory ) , and other security checks.

Notes :
1, When the sensitivity adjustment too high, the boot will be issued after the continuous alarm sound, the sensitivity can be reduced.
2, Cut off the power after use. Long-term should not remove the battery to prevent overnight, so as not to damage the circuit.
3, The probe is fixed against a crackling sound when the metal will stop only when the metal continues to sweep audible.
4.When turned on, the green light to dark and continuous alarm indicates that the voltage is less than has been unable to work , you should replace the battery .







 

HYDRIS could measure the hydrogen content of the molten steel in ladle, tundish and ingot mold directly. As the carrier gas,nitrogen passes through the probe, enters the molten steel liquid and siphons off the hydrogen from the molten steel. The process will be ended until the hydrogen content is balance between the carrier gas and the molten steel liquid

As the carrier gas, nitrogen is pushed by the pump in the circuit. It enters the molten steel liquid and forms bubbles after passing through the gas pipeline, measuring lance and the blowing pipe of the probe. The nitrogen bubble comes back to the gas cabinet by passing through the air plug of bell jar in the probe after absorbing the hydrogen from the molten steel liquid. The carrier gas will circulate in the circuit many times until the hydrogen content is balance between the carrier gas and the molten steel liquid

3-In-1 Probe(Temperature, Carbon & Sampler)

Multi-Function Sublance Probe,3-In-1 Sublance Probe,Industrial 3-In-1 Probe,Temperature And Carbon Sampler

Cangzhou Qirun Detecting Instrument Co., Ltd. , http://www.qrdetecting.com