The machining accuracy of CNC cutting machine is usually very much related to the matching motor. The installation of the components of the CNC cutting machine drive system is extremely important for the use of the whole machine. The CNC cutting machine is obviously superior to the traditional in the cutting accuracy and cutting efficiency. Hand-cut processing. In order to improve the machining accuracy of the CNC cutting machine, many users will try to adjust the motor configuration of the drive system, in which more of them are used for servo motor modification. However, many customers do not know how to correctly install. If the transmission components are not properly used in the installation process, not only the cutting efficiency and accuracy can not be improved, but the error of the cutting accuracy may be too great due to the wrong installation and correction. And even the electrodes burned. In order to avoid the losses caused by mistakes, I will explain to the majority of customers about the details of the servo motor used in the CNC cutting machine and the installation process.
Easy to tie up for disposal. The drawstring garbage bag is with retractable handles, more convenient to carry the garbage. To tighten the rope, it could lock the waste and smell easily and left the hands clean. The bags are made of high quality virgin polyethylene, with strong bearing capacity and tear-resistance. Size, thickness, color,printings and packing requirements could be made according to orders.
Drawstring Trash Bag Roll, Drawstring Bin Liners, Drawstring Trash Bags, Drawstring Kitchen Bags, Drawstring Bin Bags, Glad Drawstring Trash Bags BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.jmbillion-plastics.com
Install servo motor We should pay attention to the following matters:
1. Do not use servo motor in corrosive gas, moisture, flammable, explosive environment to avoid fire;
2. Do not damage the cable or put excessive pressure on it, place heavy objects and squeeze it, otherwise it may cause electric shock and damage the motor;
3, do not put your hands inside the drive to avoid burning hands and cause electric shock;
4. Do not touch the rotating part of the motor by hand during the operation of the servo motor so as not to burn the hand;
5, do not set the controller in the electric furnace or large coil resistors and other heating body in order to avoid fire or cause failure;
6. Overcurrent protectors, leakage circuit breakers, overheating protectors and emergency brakes must be installed to avoid electric shock, injury and fire;
7. Switch off the power supply and confirm that there is no risk of electric shock before moving the motor, wiring, and checking to avoid the electric shock of the inspector.
8. Please fix the motor and confirm the operation of the test operation in the state of the CNC cutting machine system, and then connect the mechanical system to avoid injury.
When considering the modification of servo motors, our customers must measure their own technical strength. If we say that in order to save money, if the technology is not up to the standard, it must be retrofitted. If problems arise, it will certainly affect the entire company's production. We must not lose sight of one another, because we lose a little. Before you decide to modify the servo motor, you can contact the relevant company that modified the servo motor. In order to ensure that you can normal production, Xiaobian warm reminder, do not personally modified.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
