Posted on

Model NO.: c305
Principle: Volumetric Meter
Medium Pressure: General Water Meter
Work Environment: Dry Water Meter
Stucture: Traditional
Trademark: cixier
Transport Package: Paper Carton
Origin: China
HS Code: 9028909000
Non return valve  for water meters from DN15-50,include multi jet and single jet
plastic material
prevent the water flow back


Multi-jet Dry Type Vane Wheel Water Meter
It is a multi-jet super dry water meter for residential 
application in sizes 15mm-20mm for cold  and hot meter.

Features
Compact design with smaller meter body.
Brass body is only 570g weight for save cost
45° inclined register, hot wire tamper proof.
Magnetic drive mechanism with anti-magnetic protection.
External regulation device

Standards Compliance 

Directive 2004/22/EC on measuring instruments; 
the European  Standard EN14154+A1+A2: Water Meter; 
the International  Organization of Legal Metrology OIML R-49: 2006(E)

Optional Features 
Several lengths and connections available on request
Non return Valve
Reed switch option

Working Conditions
Water temperature: ≤50ºC for cold water meter  
                                    ≤90ºC for  hot water meter 
Water pressure:   ≤1MPa or 1.6MPa optional
                  (10bar or 16bar option)

Accessories
Each meter has one set coupling optional: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.

Installation requirements
The meter should be installed in horizontal position with the direction of the flow as 
indicated by the arrow cast in the meter body with the register face upwards.
Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.

Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%.MID Certificated Multi Jet Dry Type Brass Water Meter
DN(mm)   15 20
Size(inch)   1/2" 3/4"
Q4(m³/h)   3.125 5
Q3(m³/h)   2.5 4
R80 Q2(l/h) 50 80
  Q1(l/h) 31.25 50
R100 Q2(l/h) 40 64
  Q1(l/h) 25 40
Max.Reading (m³) 9999
Min.Reading (Liter) 005
Max.Pressure (bar) 16
Pressure Loss (ΔP) 63
Max.Temperature T30 or T90


 

Oilseed Pressing Plant

In the edible oil pressing plant, before the extrusion of oil from oil containing materials, an oil pretreatment process is typically undertaken to improve the efficiency of production and to ultimately save on costs. The entire oil milling process generally includes: cleaning, sieving, hulling, separation, cracking, particle making, frying, softening, flaking, drying, and expelling oil materials. The process: cleaner --> sheller --> huller --> crusher / flaker --> steam cooker --> softening --> extruder --> dryer.

Oil Pressing Plant Pretreatment

In the oil pressing plant/edible oil pressing plant, the pretreatment process typically involves working procedures for removing impurities from the oil material. Such impurities include the following items:
  • Organic impurities, such as stems and leaves, cords and chemical fibers.
  • Inorganic impurities such as soil and metal.

Advantages of Our Oil Pretreatment Technology

  • Heated shelling features means to reduce energy consumption.
  • Double dehulling process which raises the shelling ratio to up to 85% with oil residue in hulls reduced to below 1.5%.
  • Large-volume silos to facilitate adjustments to production capacity.
  • Can produce oil cake as different grades and various protein levels which are adjustable to meet special requirements. Soybean cake can also be milled.
  • With years of research experience on screw Oil Press machine ,we can reach residual oil and low energy consumption.
  • Complete pre-treatment system can be controlled automatically.

The Goal of Oil Pretreatment

  • Improve the quality of the oil and the cake.
  • Increase rate of productivity; reduce residual oil.
  • Increase treatment capabilities of the equipment.
  • Lessens wear and lengthens the life of the equipment.
  • Ensures safety.
  • Expansion improves the rate of productivity and the quality of the oil cake.

Oil Pretreatment Process

  • Warm hulling process reduces energy consumption.
  • Double cracking and hulling process improves the hulling ratio and reduce oil residue in the hull.
  • High volume hull bin makes production flexible.
  • Makes it possible to produce meals of various protein content (includes meal milling).
  • Adopts the complete explosion puffing process.
  • Automated controls.


Cottonseed Vegetable Oil Pressing Plant Turnkey Project,Soybean Oil Pressing Plant Turnkey Project,Palm Oil Pressing Plant Turnkey Project,Sunflower Oil Pressing Plant Turnkey Project

Hebei Huipin Machinery Co.,LTD , https://www.oilpresschina.com